The Classroom Chairs with Desk feature clean lines and refreshing colors. Suitable for high-frequency lectures, focused self-study, and exams, this single-person desk and chair set is designed for primary and secondary schools and training institutions.

Adjustable

The tabletop height ranges from 620–780 mm in seven positions, with 20–30 mm increments. The chair seat heights are adjustable to 340, 380, and 420 mm, with a 50 mm seat-back gap. The columns are clearly laser-marked, and the knob tightens with a torque of ≥3 N·m, allowing for quick matching of classroom heights. Only minor adjustments are required during the semester to maintain a comfortable sitting posture.

Stability

The main frame is a 30×50×1.2 mm oval tube with a 25×50×1.2 mm crossbeam and an integrated base. The table has a static load capacity of ≥150 kg, and the chairs have a static load capacity of ≥130 kg. The lateral sway angle is ≤1.5°, and a concentrated load of 30 kg applied to the edge of the tabletop produces no visible deflection. It also maintains stable vibration even when stacking heavy books or writing large volumes.

Low Noise

The TPE foot pads have a bottom width of ≥25 mm and a dragging sound pressure of ≤55 dB. EVA shock-absorbing pads are added to the connection between the book basket and the tabletop, significantly reducing the impact sound from metal stationery. Optional ABS drawers feature nylon sliders that withstand 30,000 cycles without cracking, making them ideal for quiet morning reading, monthly exams, and evening study sessions.

Wear-Resistant Surface

The tabletop is made of 18 mm E1 particleboard with a double veneer, offering a wear resistance of ≥6,500 revolutions and resistance to dry heat at 100°C for 30 minutes without bulging. The 2 mm PVC edging is hot-melt-sealed for 100 meters without delamination. Coffee and marker stains show minimal color change after 500 wipes with a neutral detergent, making it suitable for high-frequency disinfection.

Ergonomics

The tabletop tilts between 0° and 8°, allowing for quick transitions between writing and reading. The backrest reclines 100–102°, and the seat tilts 2° higher and lower. The footrest is 260 mm from the floor, providing natural leg support. The backrest ventilation slats are 8 mm wide, keeping you cool even after extended sitting.

Safety Details

The table corners are rounded 15 mm with concealed screw caps. The base features anti-tilt guides and non-slip end caps. The backpack hook has a load capacity of ≥15 kg, ensuring students are not tripped when entering or exiting. All metal ports are rounded, eliminating sharp edges in the leg area. The design has passed 50 mm drop and 24-hour static pressure tests.

Easy to maintain and versatile

The powder coating is 60–80 μm thick and resistant to blistering for 72 hours in a neutral salt spray environment. Standard M6 fasteners are used, requiring only a hexagon socket for routine maintenance. The book basket is made of perforated steel wire, allowing paper scraps to be shaken off directly. The tabletop is available with an optional transparent anti-writing layer and leg protection rings, increasing cleaning efficiency by over 30%.

Logistically Friendly

Delivered semi-pre-packed, each set is approximately 105 x 55 x 15 cm in a box, with a gross weight of 24–26 kg. A 20-inch GP rack is recommended to hold 220–240 sets. The outer box is affixed with height-grade labels and a spare parts package, allowing for rapid on-site distribution and location by classroom number, meeting centralized procurement and tight delivery deadlines.

Standard Public Elementary School Classrooms

Arranged in four to six rows in a row, with two to three height levels based on height. A 90 cm teaching aisle is reserved from the blackboard to the first row, with 60 cm row spacing and 50 cm chair spacing. Students place essential textbooks and stationery in the book baskets in layers. The monitor repositions the Classroom Chairs With Desks using floor stickers and takes photos for recordkeeping. The cleaning team cleaned the entire classroom in ten minutes using dusting and wet mopping, allowing the second class to begin on time.

Municipal junior high school centralized examination room

Rows were marked with 1.1-meter spacing and a 1.5-meter invigilation path. Tables were fixed at a horizontal angle, and drawers were temporarily sealed. Students were assigned their assigned seats according to their numbers, and invigilators inspected the table numbers and seals. After the bell rang, students were returned to their normal positions according to their rows and columns. Examination staff used a checklist to verify and seal the rooms. The entire floor was cleared and restored within the specified timeframe, ensuring that adjacent exam rooms were not disturbed by noise.

Evening study rooms at a private training institution

The academic staff preset three to four height settings; students only need to fine-tune the knob before entering. Reading rooms switch to an 8° incline, while lectures and reviews return to a horizontal position. Centralized wiring on the wall provides power to the tablet and projector, eliminating tangles in the base. After each session, drawers and book baskets are tidied before the next session begins. Floor mats and fasteners are inspected before closing, and maintenance points are recorded daily.

Study Areas in the City Library

The wooden flooring features rubber mats and EVA tabletops, ensuring low noise and floor damage. Seats are numbered by row, and backpacks are hung on hooks on the right side to maintain aisle clearance. Ten minutes before closing, volunteers wipe the tabletops and chair backs with a neutral detergent, and administrators inspect fasteners and power status to ensure cleanliness and order in public areas.

Study Corner in Campus Dormitory

A 600×450 mm compact tabletop and a sled-legged chair are placed against the wall. The 8° tilt is used to relieve neck and back pressure for nighttime reading, and to restore balance during daytime homework. Drawers store commonly used stationery, and book baskets hold review materials and tablets. Dormitory administrators inspect fasteners and floor mats for wear by bed number, and centralized maintenance is provided on weekends to ensure cleanliness and quietness throughout the semester.

Physics and Chemistry Laboratory Theory Area

Horizontal tables are used for pre- and post-experimental explanations and note-taking. Backpacks and materials are centrally located on hooks and baskets, away from wet areas and reagents. The epoxy flooring minimizes wear due to the base guides. After each get out of class, desks are wiped clean. Lab technicians inspect bolts and end caps to maintain clear aisle widths, allowing the next class to quickly move into their assigned positions according to the designated lines.

Community Public Welfare Classroom

For students of different age groups, classroom chairs with desks are color-coded by height. Every weekend, volunteers inspect the desk edging and foot caps for wear and replace them. Book baskets are used to store shared stationery and exercise books. After each class, chairs are repositioned and signed off, ensuring a clean and tidy community room despite high turnover.

Campus Auditorium Temporary Exam Seating

The venue requires quick setup and removal. Tables are fixed and level, and row spacing and aisles are marked according to floor stickers. Property management deploys the entire set of chairs on carts, with invigilators numbering each row. After the exam, chairs are folded and returned to storage within 15 minutes. Classroom chairs with desks are shelved according to batch codes, ensuring seamless transition to the next activity.

Rural Boarding School Mixed-Age Classroom

Single classrooms serve multiple age groups. Seats are assigned by height at the beginning of the semester and adjusted once or twice during the semester based on height. The metal frame is durable, the fasteners are universal, and centralized maintenance is performed during holidays; the book basket reduces desk clutter, allowing teachers to maintain a clean teaching environment with limited cleaning staff.