The Kindergarten Classroom Chairs feature a one-piece injection-molded polypropylene seat and back, with oval handle holes for easy grip and mobility. The base is constructed from a powder-coated steel tubing frame with four legs. The front legs are curved and reinforced for increased support, and the feet are fitted with TPE non-slip caps. Designed for kindergarten and preschool environments, these chairs are lightweight and durable.

Lightweight and durable: 

The seat and back are constructed from impact-resistant PP with a wall thickness of 2.5–3.0 mm. The steel tubing frame utilizes Ø19×1.2 mm carbon steel tubing. The Kindergarten Classroom Chairs weigh approximately 3.2–3.8 kg. They have a static load capacity of ≥120 kg and have passed 10,000 sitting fatigue cycles and 1,000 lateral swing tests, ensuring they remain stable despite frequent use and movement, meeting the durability requirements of campus environments.

Multiple sizes available: 

Seat heights are available in four options: 22/26/30/34 cm, corresponding to heights of approximately 85–135 cm. The seat width is 30–34 cm, the depth is 28–31 cm, and the backrest height is 24–28 cm. The same series can be mixed across grade levels, allowing schools to quickly select and replace models based on class.

Safety Rounded Corners

All outer edges have a chamfer radius of 3 mm or greater, and the front edge of the seat is rounded to prevent leg pressure. The back hole edge is 2 mm thickened to provide a comfortable grip for children. Kindergarten Classroom Chairs have no exposed screws or sharp corners, effectively reducing the risk of bumps and bumps during sliding and moving, meeting campus safety regulations.

Ergonomics

The backrest reclines 100–103° to conform to the S-shaped spine. The front seat is 2–3° higher and lower at the back, promoting a neutral pelvic position and natural foot contact. The slightly curved seat and back vents reduce heat buildup, ensuring comfort even for 30–40 minutes of quiet reading or doodling.

Non-slip and Quiet

The footrests are made of wear-resistant TPE with a contact surface diameter of 22 mm or greater. The static friction coefficient μ is ≥0.55 on tiled or wooden floors. Mopping noise is ≤50 dB, making it ideal for library corners and multi-purpose classrooms, minimizing disruption to peer activities.

Easy to clean and stain-resistant

The high-gloss finish on the housing allows for 1000 wipes of watercolor pen and chalk marks with a mild detergent and damp cloth without noticeable fading. The metal frame is powder-coated to a thickness of 60–80 μm and withstands salt spray for ≥72 hours without blistering, ensuring ease of daily disinfection and mopping splashes.

Stable Stacking

 10–12 chairs of the same model can be safely stacked, with a spacing of approximately 45–55 mm between chairs to prevent sticking. A stack of 12 chairs stands approximately 1450 mm high. A cart allows for transporting the entire stack in one go, making transitioning from desk and chair mode to activity area more efficient.

Eco-friendly and Customizable

The material is BPA- and heavy metal-free, with RoHS/REACH material declarations available. Pantone colors are customizable, and the backrest can be laser-marked with class/number codes. Standard packaging of 4–6 chairs per carton facilitates bulk delivery and inventory.

Reading Corner/Book Area

Back holes allow children to move their chairs into their designated positions independently; non-slip foot covers are silent and won't disturb their peers on the wooden floor. A 22–26 cm seat height paired with a low-profile bookcase allows children to maintain an upright sitting posture with their feet planted on the floor, fostering quiet reading habits and a sense of order in the space.

Art and Craft Classroom

The high-gloss PP material resists watercolor, glue, and clay residue and can be easily restored with a damp cloth. The 2–3° slope of the seat reduces fatigue when leaning forward, ensuring stability during continuous scribbling and clipping. After class, chairs can be stacked 12 high in a corner for more efficient floor cleaning.

Children's Canteen/Lunch Area

No splinters or exposed metal. Chlorine or alcohol-based cleaning solutions can be used for daily disinfection after meals. A 30 cm seat height and a 52–54 cm table height are recommended. The foot covers provide greater contact surface, ensuring stability even on wet surfaces and reducing the risk of slips and tipping.

Multi-Purpose Hall/Activity Room

Parent-Teacher Meetings, performances, and physical education classes require quick set-up and clearing. Each chair weighs approximately 3.5 kg, allowing teachers to carry 3–5 chairs at a time. When neatly arranged, rows can be spaced 45–55 cm apart, ensuring both accessibility and meeting evacuation standards.

Corridors and Pickup and Drop-off Waiting Areas

The UV-stable color is suitable for window-side and semi-outdoor corridors. The foot covers provide wide contact without damaging the floor, ensuring order during short waits or parent-teacher conferences. Grade-level color coding is printed on the chair backs for remote identification of class.

STEAM/Science Exploration Room

Long-term group experiments require a stable sitting posture and a quiet environment. The curved backrest and ventilation holes keep backs dry, and movement noise is ≤50 dB, ensuring no disruption to recording and explanations. The metal frame can support ≥120 kg, ensuring smooth movement even when lab equipment is loaded on the table.

Health Care Room/Temporary Observation Room

The easy-to-clean material is compatible with body fluids and disinfectants and can be quickly reset with a wipe. The 22–26 cm seat height allows children to land on their heels without strain. The rounded corners reduce the risk of secondary injuries, making it suitable for campus emergency and health observation scenarios.